Giá đỡ camera cho khung Biqu Enclosure

So once upon a time, I bought this Biqu enclosure to put my Sovol SV06 inside, to help with printing ABS. My previous camera mount had been doing the job, but it was originally printed out of PLA and I noticed that it was developing a bit of a sag after some longer ABS prints. I decided to try again, and put it on the frame instead.

I'll be the first to admit that this isn't a perfect design either, but it has been functioning well enough. I get a better view of most prints, and the frame mount snaps on quite securely to the frame.

It requires 2x M2 bolts to mount the camera to the camera mount, and then optionally another M2 or something similar to fix the camera mount to the frame mount. Printing this model on my printer, the pieces friction fit tightly enough that the additional bolt feels uneccessary and and I instead use the space to store the M2 hex key when unused.

To print, split the attached model and orient the models as you'd expect. No supports are required.