
Dụng Cụ Tiện Ích
Giá đỡ Bachi cho Taiko Force lv.5
- Downloads
- 24
- Likes
- 3
- Views
- 629
- Remixes
- 0
- Comments
- 0
Files 1 88.9 KB
- Bachi_Holder_1767294053.stlSTL · 88.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #54560
- Category
- Dụng Cụ Tiện Ích
- Published
Description
I wanted to store my bachi with the taiko. If I left them separate I'm sure I would lose them sooner then later. But not anymore!
Disclaimer: I am not responsible for anything going wrong with either your drum, bachi or parts thereof.
You may also be interested in control box brackets: https://www.printables.com/model/630766-taiko-force-lv5-control-box-brackets-with-simple-s
23mm diameter bachi is the maximum this will hold! (That is the wood with grip tape applied)
How to install:
- Print holder (Any reasonable settings will do. Larger layers will speed up the print time significantly).
- Put bachi into the holder and put it on one of the legs. When satisfied with the position remove bachi and mark the holes with pencil.
- Remove leg from taiko.
- You have two options (Use M4 flat face bolts):
- Drill 3mm hole, then tap 4mm threads (or drill 3.5mm hole and use the bolt itself to tap). Then screw the holder into the leg.
- Drill 4-4.5mm hole, then use nuts and washers from the other side
- Reassemble taiko
- Enjoy
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 88.9 KB
- Largest file
- 88.9 KB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-
New -

-

-

-

