
Máy In 3D
Bộ làm thẳng ống Bowden cho máy in Ultimaker 2+
- Downloads
- 22
- Likes
- 9
- Views
- 162
- Remixes
- 0
- Comments
- 0
Files 2 4.1 MB
- Remix_of_Bowden_Tube_Straightener_for_UM2_1766191906.stepSTEP · 234.3 KB
- Remix_of_Bowden_Tube_Straightener_for_UM2_1766191906.STLSTL · 3.9 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #54126
- Category
- Máy In 3D
- Published
Description
Remix of the great"BowdenTube Straightener" byTheSeend adapted for an Ultimaker 2+ and Ultimaker Extended 2+.
What are different in this remix :
- the bowden straightener region is nowcircular, in order to straighten the tube during printing in all surface of the building platform,especially the back area toavoid flexion of the bowden andreduce friction of the filament into the bowden.
- the distance between the two screws axis, the diameter of screw heads and the space for the clip were measured and re-adjusted
- the square hole has no particular function, but is just there to reduce the amount of material without decreasing mechanical strength
Files are available in STL and STEP formats.
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
No
Supports:
No
Resolution:
100 or 200 um
Infill:
30 %
Notes:
PLA used: PolyMax black from PolyMaker
Category: 3D Printer Parts
Print spec
- Formats
- stepstl
- Model files
- 2
- Total size
- 4.1 MB
- Largest file
- 3.9 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-


