Giá đỡ Flex3Drive cho Railcore II với Mosquito Hotend

This pack contains my customized Flex3D mount for Railcore II.

It contains:

-G5 base with integrated mounting bracket

Allows lightening up the gantry, lower the filament path to an absolute minimum, and gain over 10mm in Z travel.

Also integrates a BL-Touch mount

-G5 Cap with extra support for the PTFE tube

-Extra high, 3-dots tension arm with 0.2mm more preload than the 2-dots one for very small filaments

-Stepper coupler with added flat for better grip on the axle with less tension on the screw

-Mosquito inserts to prevent the mount to creep into the mosquito's oblong locators when hot

-Stock G5 top, motor clamp and motor cap; just so you have them

-Custom 5150 part cooling fan shroud to accommodate for the higher nozzle

Visit https://flex3drive.com/ to get your remote extruder kit!

Print Settings

Printer:

Railcore II ZL

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.14

Infill:

25

Filament:

generic CF-PETG or PA

black

Notes:

Try to print the base, top and cap in higher resolution; I used 0.14

The tension arms can be 0.2mm, Cura's tree supports work amazing

All the remaining coupler, clamp, motor cap can be printed for strength 0.2+

Category: 3D Printer Extruders