Skip to main content
F3D
Chuyển đổi máy in 3D CR-10 Smart sang Klipper 1

4 images

Máy In 3D

Chuyển đổi máy in 3D CR-10 Smart sang Klipper

By Larry Alcorn Alcorn

Downloads
74
Likes
12
Views
1,345
Comments
2

Files 8 1.3 MB

  • CR-10_Smart_Relay_1.2_Mount_v18_1768572148.stlSTL · 77.4 KB
  • SKR_E3-V3_Mount_v18_1768572148.stlSTL · 123.3 KB
  • Cr10_Pi_Mount_v12_1768572149.stlSTL · 107.5 KB
  • PITFT50_CR-10_Smart_Mount_v14_1768572150.stlSTL · 144.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#53519
Category
Máy In 3D
Published

Description

The CR-10 Smart has many good features, however, is has its issues.  Major Goals were to convert the CR-10 Smart to a reliable machine.

Items to be addressed:

  • Gain the improved features, better user interface and wireless interface by moving to Klipper
  • House all the components in the existing electronics enclosure
  • Provide better Electronics enclosure cooling
  • Incorporate Klipper Screen compatible Display
  • Replace the Strain gauge Bed Leveling Sensor with BL Touch
  • Add Direct Drive Extruder
  • Incorporate an all metal hotend
  • Improve part cooling

Conversion Process:

Removed all the Creality electronics: Main board, Shutdown relay, Creality Box PCB, Power board, and X-Carriage Board.

Parts:

  • BTT SKR Mini E3 V3.0
  • BTT Relay V1.2 Automatic Shutdown Module
  • Raspberry PI 4b 2gb
  • Meanwell RS-25-5 Power Supply
  • BTT PITFT50
  • Replaced the existing 24vDC 60mm electronics enclosure cooling fan with two 5vDC 60mm fans in a push pull arrangement - WINSINN DC 60mm Fan 5V 6010 Dual Ball Bearing Brushless Cooling 60mmx10mm
  • Dragon Blaster Tool Head  - Dragon-Burner/V0/Dragon_Burner at main · mu5h3r/Dragon-Burner · GitHub
    • 2x 4010 blower fans (24v recommended)
    • 1x 3010 hotend fan (24v recommended)
    • 3x Neopixels
  • LGX Lite Extruder
  • Voron Revo Hotend
  • Amazon - jujinglobal 10pcs USB a Male or Female Breakout Board 4 pins 2.54mm Output with 2 Types Male pins 90 and 180 Degree… (USB A M & F Breakout (5 Pairs))

3d Printed parts:

Mounts for the following printed with PLA or PLA+

  • BTT SKR Mini E3 V3.0
  • BTT Relay V1.2 Automatic Shutdown Module
  • Raspberry PI 4b 2gb Mount

Display Mount and Bezel printed with PLA, PLA+ PETG

All Toolhead parts printed with ABS.

Wiring:

Wiring is pretty straight forward.

The BTT Relay V1.2 Automatic Shutdown Module provides Main AC power to the stock 24vdc power supply. If Klipper senses any issues, it can shut down the printer (24vDC Power Supply) through the main board.

The new RS-25-5 Power supply is connected directly to the main AC power.  The 5vdc output powers the Raspberry PI through the GPIO Pins and the 2x new 60mm electronic cooling fans.  This will cool the electronics enclosure (Raspberry PI) regardless for the status on the 24vDC power.

The Existing External USB socket can be reused by re-terminating the internal end with a USB female and plugging directly into the raspberry PI.

Read more Show less

Print spec

Formats
stl
Model files
8
Total size
1.3 MB
Largest file
254 KB

2 comments

See all