Skip to main content
F3D
Máy xay cần sa cho gia vị và thảo mộc 1

6 images

Đồ Gia Dụng

Máy xay cần sa cho gia vị và thảo mộc

By Bobo

Downloads
2,802
Likes
404
Views
19,035
Remixes
1
Comments
21

Files 8 2.2 MB

  • Shell_1765458204.stlSTL · 154.5 KB
  • Tray_1765458214.stlSTL · 246.6 KB
  • Grinding_wheel_finer_1765458225.stlSTL · 144.8 KB
  • Grinding_wheel_1765458233.stlSTL · 130 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

Hemp grinder

Note: New version of this grinder design is availablehere

This grinder was designed for ease of printing with 0.6mm nozzle. Teeth are larger than other common grinder designs. Yet it can produce finely ground herbal particles.

Contains slots for two 2mm diameter x 0.8mm magnets. Grinding plate is inserted into the shell. There are 3 notches that should prevent grinding wheel slip (gluing these parts is recommended). 

Durability tested with 0.6 mm nozzle,  15 % hex  infill, 02.mm layer height and only 2 perimeters with Nebula light blue PLA. It was dropped on concrete floor from 2 meters and grinding was tested first with CBD hemp and later with some harder spices like whole pepper and clove. Whole room smelled like clove afterwards.

However its purpose is not to grind hard spice but hemp flowers. You can use finer version of the grinding wheel if you find the normal version not fine enough (not tested).

Beginner printing notes: Orient all parts correctly before printing, some parts are flipped in the STLs. Tray, shell and grinding wheel should face upwards as on the main picture. The lid should be printed flat side first with teeth upwards.

If you want custom lid design, you can use blender to import svg file, extrude it, convert to mesh and create your own lid with boolean modifiers.

The threads can sometimes be too stiff, just use little bit of oil and they should work just fine. Using mineral or silicone oil is better but vegetable oil should be fine too. Then wipe any excess with alcohol or soapy water.

Read more Show less

Print spec

Formats
stlzip
Model files
8
Total size
2.2 MB
Largest file
644.3 KB

21 comments

See all