Skip to main content
F3D
Vỏ bọc Rook cho máy in 3D Rook và Bishop 1

3 images

Máy In 3D

Vỏ bọc Rook cho máy in 3D Rook và Bishop

By StatCat_949514

Downloads
26
Likes
18
Views
870

Files 15 2.7 MB

  • Simple_Rook_Enclosure_Foot_Bishop_1766185769.stlSTL · 241.3 KB
  • Simple_Rook_Enclosure_Foot_Blank_1766185770.stlSTL · 197.7 KB
  • Simple_Rook_Enclosure_Foot_Rook_Bishop_1766185770.stlSTL · 223.7 KB
  • Simple_Rook_Enclosure_Top_Corner_Bishop_1766185771.stlSTL · 336.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

A rough and ready enclosure for Rook and Bishop printers. I made mine from (rather beat up) Correx but it could easily be made from cardboard or any other material around 2mm thick. 

To assemble just tape the panels together (using heat resistant tape) and then align the printed parts. I used an awl to punch out the holes but this could be done with anything sharp. All parts are then attached with countersunk M3*6mm screws and nuts (needs 71 pairs in total).

The sizes for the panels are as follows (for a tight fit, may need some ease added):
Front and Back: 256mm x 440mm
Sides: 326mm x 438mm
Top: 256mm x 326mm

Cut-out for the window: 105mm x 105mm ( for 100mm x 100mm acrylic panel)
Cut-out for the thermometer: Approx 43mm circle 

For the skirt cut-outs (to allow airflow to the electronics) I have made a simple template which can be traced around, once the feet positions have been found.

As my printer has a combination of both Rook and Bishop elements, I incorporated both of these logos into the corners. There are several version of these, however, to suit your build.

Read more Show less

Print spec

Formats
stl
Model files
15
Total size
2.7 MB
Largest file
336.9 KB

0 comments

See all