Giá đỡ trục XZ cho máy in Prusa MINI

Had a skewing problem with a Prusa MINI (which is common well known problem), so this is the fix. It also eliminates the vibrations from the Z-axis lead screw rotation.

Printed in  Fiberlogy Vertigo PET-G, 3 perimeters, 25% infill, 0.4 mm layer height.

Printing time - 01:28 h (but with 0.6 mm CHT nozzle).

BOM:

4 M5x12 mm screws;

4 M5 T-nuts.

INCTRUCTIONS:

Loose the three screws fastening the z-axis to the right aluminum profile (see pics). Mount the brace and tighten the M5 screws. Tighten again the M3 screw. Now follow these instructionsif you need to.

If you like it, please click on ❤&⭐.

Thank you!