Đế dock Steam Deck Anker A555 USB-C với thiết kế v2

DESIGN DOES NOT SUPPORT CASES

Converts the  Anker A555 USB-C Hub into a fully enclosed Steam Deck Dock. V2 Design means new snap design and no more screws needed.

Tolerances were made for printing at 0.3mm layer height.

IMPORTANT!Print the top piece as mesh, if the hubs are fully enclosed they will 100% overheat! (top layers: 0, bottom layers: 0, wall line count: 8, infill pattern: lines, infill density: 22% or less)

Bottom Piece can be printed similarly, your choice. (my bottom is mesh)

Optional Parts

USB-C 3.1 Right Angle Adapter/Extender https://www.amazon.com/dp/B08CDGHQWF

CAT6 Right Angle Ethernet Cable https://www.amazon.com/dp/B01FHC0H7G

Total Part Cost ~$16