Skip to main content
F3D
Antena Moxon 868 MHz 1

5 images

DIY

Antena Moxon 868 MHz

By bear-beer-3dmikl

Downloads
184

Files 4 614 KB

  • Moxon-869-base.stlSTL · 270.9 KB
  • Moxon-869-top.stlSTL · 55 KB
  • Moxon-869-support1.stlSTL · 78.3 KB
  • Moxon-869-support-2.stlSTL · 209.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The moxon antenna at 868 MHz is combined with the Heltec V3 (V4) board in one housing for stationary use in the Meshtastic or Meshcore network. There are two installation options: on a stem for indoor or outdoor use, and on a mast using plastic ties for outdoor use. The housing cover is secured with 4 DIN7981 2.2x6.5 screws. The antenna and holder are connected with a M3x10mm screw and nut. The antenna has a 2mm copper wire diameter. When used outdoors, the lid and openings must be sealed.

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
614 KB
Largest file
270.9 KB

0 comments

See all