
A320 Glarewing - WinCtrl compatible
Remix of Phân chia thông số cho hộp JYSK GILLIS By stefanlitter_1142823
- Downloads
- 158
- Likes
- 0
- Views
- 0
- Remixes
- 0
- Comments
- 0
Files 4 356 KB
- A320 Glarewing Housing-CPT.3mf3MF · 16.3 KB
- A320 Glarewing Panel-CPT.3mf3MF · 181.1 KB
- A320 Glarewing Panel-FO.3mf3MF · 142.7 KB
- A320 Glarewing Housing-FO.3mf3MF · 16 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #419993
- Category
- Dụng Cụ Tiện Ích
- Published
Description
This A320 Glarewing is designed to be connected to the Winwing/WinCtrl EFIS-L and programmed with Mobiflight.
When attaching to the EFIS-L, the bottom left screw of the EFIS can be removed, but the top must stay connected (There is a brass insert on the back of the EFIS that you will screw into, the front screw is secured with an internal nut. If you unscrew the top screw, the nut will dislodge inside the EFIS housing)
I found that when printing the text with the Prusa XL, its have the text be printed before the rest of the layer is printed to ensure the cleanest text.
The blue filament in the image is Overture Jeans Blue (which seems to have been discontinued), Polymaker Muted Blue also seems like a close (enough) match.
Components needed to attach the front panel to the housing:
3x m3 x 5mm brass heatset inserts
3x m3 x 6mm screws
Components needed for the panel buttons:
3x 17.5mm momentary LED push button (3-6v, 1no 1nc, self reset)
1x 17.5mm momentary round button
1x Arduino Pro Micro
Components needed to attach the housing to the EFIS-L:
1x m3 x 10mm screw (Top screw)
1x m3 x 20mm screw (Bottom Screw)
1x m3 nut
Changelog:
10/6/26: Added mirrored version for FO
If you want to help support the development of my designs: https://ko-fi.com/rwills
Print spec
- Formats
- 3mf
- Model files
- 4
- Total size
- 356 KB
- Largest file
- 181.1 KB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-
New -

-

-

-


