Skip to main content
F3D
ESP32 Case DevKit V1 (Elegoo) – Snap Fit Enclosure – Perfec… 1

9 images

DIY

ESP32 Case DevKit V1 (Elegoo) – Snap Fit Enclosure – Perfect Fit

By slayzzor

Downloads
117

Files 8 238.3 KB

  • esp32_case_preview.stl.stlSTL · 76.6 KB
  • esp32_case_lid.stlSTL · 43.6 KB
  • esp32_case_base.stlSTL · 104.5 KB
  • esp32_case_lid.scadSCAD · 2.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

A compact and precisely fitted enclosure designed specifically for the Elegoo ESP32 DevKit V1.

After testing multiple available models that either did not fit correctly or were too tight, this case was designed from scratch and iterated through real-world testing to achieve a reliable and consistent result.

The ESP32 can be inserted easily through the USB-C opening and pressed into place. The lid snaps in securely while remaining removable without excessive force.


Features:

  • Designed for Elegoo ESP32 DevKit V1

  • Precise and consistent fit

  • Optimized USB-C opening for smooth insertion

  • Balanced snap-fit lid (secure but removable)

  • No wobble, no excessive tightness

  • Clean internal geometry

  • Minimal material usage

  • No supports required

  • Fully remixable


Printing:

  • Layer height: 0.20 mm

  • Nozzle: 200°C

  • Bed: 60°C

  • Walls: 3

  • Infill: 15%

  • Print speed: ~55 mm/s


Important:

  • Print the base flat on the bed

  • Print the lid with the outer side facing down

  • No supports required

For best dimensional accuracy, a smooth PEI build plate is recommended.


Assembly:

  • Insert the ESP32 through the USB-C opening

  • Press the board down into the case

  • Snap the lid into place


Customization (OpenSCAD included):

The OpenSCAD source files are included.

ESP32 boards can vary slightly depending on the manufacturer.
The model is fully parametric and can be adjusted if needed.

A combined OpenSCAD file is included for easy export and preview of both parts.


Adjustable parameters:

  • inner_x → board width

  • inner_y → board length

  • inner_height → internal clearance

  • usb_w → USB width

  • usb_h → USB height

  • usb_z → vertical position

  • lid_clearance → lid tightness

Typical adjustments are in the range of ±0.1 to ±0.3 mm.


Versions:

Two versions of the case are included:

  • Version with USB insertion relief (easier assembly)

  • Clean version without relief (cleaner look)

The relief version slightly reduces friction when inserting the ESP32, especially around the USB-C area.


Notes:

  • Designed and tested on a real Elegoo ESP32 DevKit V1

  • Fit is snug but functional

  • Printer calibration can affect the final result

Read more Show less

Print spec

Formats
scadstl
Model files
8
Total size
238.3 KB
Largest file
104.5 KB

0 comments

See all