Skip to main content
F3D
AA Battery Dispenser Honeycomb walls 1

2 images

DIY

AA Battery Dispenser Honeycomb walls

By badlybread

Downloads
178

Files 3 521 KB

  • AA_Battery_dispenser_honeycomb_v2.stlSTL · 205.2 KB
  • AA_battery_dispenser_honeycomb.3mf3MF · 184.8 KB
  • AA_battery_dispenser_honeycomb.stlSTL · 131 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Instructions:

[3mf file]
1.) Upload the 3mf file as "Import 3d models only" as the connectors were added via PrusaSlicer.
2.) Print
3.) Align the connectors and firmly but gently, and carefully insert it into the holes (its snap fit)

[stl file]
1.) Upload the file to your slicer
2.) Print
3.) Align the connectors and firmly but gently, and carefully insert it into the holes (its snap fit, however you have to bend the connectors a little bit so that it fits through the hole, after which just push it inside, after you push it for enough, it will lock)

Try the AAA version! 



[Update 5/20/2026]
I added custom snap fit joints, because the connector holes seem to not work with easyprint, this version can be found in the files alongside the old one

If you have any feedback, please let me know!

[Notes]

The grey one is via 3mf, and the black one is the new STL file.

[DISCLAIMER]

The text on the photo is not in the file, I added it myself via PrusaSlicer's text modifier, however, you can download the STL file and add your custom text and custom connectors (if you chose the not already cut one, and would you need to add connectors yourself since the STL file does not have it).

The 3d preview does not show the hole slots for the insertion of the joints, however if you import the 3mf file as "Import 3d models only", It will show up.

Read more Show less

Print spec

Formats
3mfstl
Model files
3
Total size
521 KB
Largest file
205.2 KB

0 comments

See all