Skip to main content
F3D
DIY fume extractor 1

3 images

DIY

DIY fume extractor

By ivan-the-sassquatch

Downloads
103

Files 3 931.5 KB

  • fume_extractor_bottom.stepSTEP · 266 KB
  • fume_extractor_top.stepSTEP · 256.6 KB
  • fume_extractor.sldprtSLDPRT · 408.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

I recently restarted doing small robotics and drone projects since I finally bought a 3D printer.

Some soldering is required for that, and the fumes can get quite nasty, especially when you are working in your room.

That is where a fume extractor comes in handy, to avoid breathing in too much solder smoke.

So I did the logical thing: instead of buying an off-the-shelf one for 50 euros, I spent 40 euros on parts and several hours designing my own.

Not the most practical decision, admittedly, but meh is was quite fun, and there is something really satisfying about building the tool that will later be used in other projects.

It was also a good opportunity to practice 3D modelling and learn how to integrate external components into a print, all in a relatively simple project

Components sourcing

Overview

The core components are a 120mm PC fan, a 12V DC power supply with a barrel jack, and a power button.

I chose not to integrate a PWM module for simplicity, there is no real need to control fan speed here, it is either on or off.

Finding suitable filters took a bit more research.

Filters specifically marketed for soldering fume extraction seemed overly thin and quite expensive.

I ended up going with a large sheet of 15mm thick activated carbon fabric, the kind originally intended for kitchen hoods.

The final filter stack consists of three layers of that activated carbon fabric, plus one layer salvaged from a vacuum cleaner filter.

Links

Here are the references for the components used, in case someone want to reproduce the build.

Component

Reference

12 V dc power supply

AGOTD 24W Universal AC to DC 12V Power Adapter

Power switch

Mini toggle switch T85 KCD1-101

120mm pc fan

be quiet! Pure Wings 3 120mm

Vacuum filter

NEDIS Vacuum Cleaner Motor Filter

Carbon activated sheets

Fackelmann 0807450 Natural linen and activated carbon cooker hood filter

Design

I started by sketching out the 3D model.

My initial plan was to add feet and a funnel-shaped intake to better draw in air, but after a few attempts, the geometry kept adding unnecessary bulk and fragility.

I pivoted to a simpler, more compact design that would be more durable and small enough to slip into a drawer.

The final model consists of two parts:

  • Main box: open on one side with recessed corners to hold the 120mm fan. It also includes the electronics cavity: a small compartment on top of the main box, with cutouts for the barrel jack and power button, plus enough room for basic cable management.

  • Lid:A back lid with ventilation slots closing the main box.

The filter layers are then sandwiched between the fan and the lid, and 4 longs M4 screws are used to hold the assembly together.

Printing

Both parts were printed in PLA Pro with a 20% grid infill.

Nothing exotic here, the geometry is simple enough that print settings barely matter.

Total print time across two batches was roughly 8 hours.

The automatic supports for the electronic cavity and the fillet at the base of the main box worked well.

Assembly

Assembly is straightforward: four M4 × 80mm countersunk bolts and matching nuts hold everything together.

The model includes extruded cut for the nut and the screw head for a slicker assembly.

The only soldering required is wiring the power button in line with the fan.

Result

Here is a quick demo of the extractor:

The extractor works surprisingly well given that the fan has to pull air through four layers of fabric.

It can capture fumes from up to 30 cm away from the soldering point, and no visible smoke passes through to the exhaust side.

That said, it is not a substitute for a purpose-built fume extractor, some fumes still get through, and the filters are probably not optimal for fine particulates.

But it remains orders of magnitude better than nothing, which was the whole point.

If I were to build a v2, I would look into proper HEPA or activated carbon filter cartridges for a tighter fit and better filtration.

For now though, it does the job.

Read more Show less

Print spec

Formats
sldprtstep
Model files
3
Total size
931.5 KB
Largest file
408.9 KB

0 comments

See all