Elegoo Centauri Carbon 2 Composite Filter Muffler

Found Mongrel's design for the original CC, couldn't work with the Mesh very well, so redesigned this from scratch!

This was my first model, I'll take any criticism.

Problem:
The stock CC2 exhaust composite filter only covers half of the exhaust fan.


Solution:
Recreated Mongrel's design from the ground up to work for the Elegoo Centauri Carbon 2 (CC2).

Details:
This design is as close to the Mongrel design as possible, with a few adjustments to reduce some airflow restriction from creating too many channels for air.

There are guide screw holes, which should not be covered to allow the exhaust cover/filter/muffler to be fitted onto the rear of the chassis and "know" you're in the right spot. 
Those are identified with RED ARROWS in the images.

Composite filter:
This is designed to fit using the stock CC2 composite Carbon+Hepa filter, which are cheap from Elegoo.

Magnets:
Uses SIX 10x3mm (measured at 2.7mm) magnets.