Centauri Carbon 2 cover / TPU front PC4-10 adapter

Same assembly instructions as the original, but with different tube sizes:

(I started with a longer tube and trim it to fit without many twists)

Direct to extruder: 520mm

From cover to Canvas: 65mm

Cover to box: 280mm **

**(only if you have the same model installed, if not just add a short strip to prevent any tangles)

Screw the PC4 on, put the cover to Canvas tube first without inserting to the cover yet, then the PC4 one to the extruder, gently put the entire cover on, open the glass door and gently insert the shorter tube on the cover with your arm inside.

I hope you all like it, thanks for reading <3