Skip to main content
F3D
Sovol SH03 Filament Dryer Desiccant Box 1

5 images

Sovol SH03 Filament Dryer Desiccant Box

By beakbird

Downloads
114

Files 2 289.4 KB

  • SH03 Box Base.stpSTP · 53.2 KB
  • SH03 Box Cover.stpSTP · 236.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#417903
Published

Description

The Sovol SH03 filament dryer is a 4 spool dryer with 2 independent chambers.

Each chamber has a compartment on the bottom to hold desiccant bags.

I wanted to use loose pellets so I made this box which fits precisely in the compartment.

The 2 chamber compartments for some reason only known to Sovol have different locations for the side guide slots. This box and cover are designed symmetrically to be able to fit into both compartments.

For each chamber you need to print 1 box and 1 cover (included files) so 2x box + 2x cover for the dryer.

You should use temperature resistant material since the dryer can heat up to 85 degrees C.

I used Prusament PC-CF and used the Core One 0.20mm Structural profile with 25% gyroid infill. No supports needed if you lay parts flat as they are in the files.

Read more Show less

Print spec

Formats
stp
Model files
2
Total size
289.4 KB
Largest file
236.3 KB

0 comments