ExoGuitar - Bộ cánh Jack's Son

Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com

Plan Your Build & Get Hardware

ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoGuitar parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.

You can find this specific part, ExoGuitar - Wing Sets - Jack's Son, on our site.

Step 1: Combine Wing Segments

Use glue and M3 screws to combine the pieces of the wings together

Step 2: Install Heat Set Inserts

Step 3: Attach Wings to Body

Step 3a: Insert Heat Inserts

Step 3b: Attach Left Wing

Step 3c: Attach Wing Middle

Step 3d: Attach Right Wing

Step 4: Install Magnets

Hardware

DIY Kit

You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $15.70 plus shipping.

Self Source

If you want to order the parts yourself, here's a list. Estimated cost: $98.67.

• 6x Screw - Button Head - M5x10
• 6x Nut - Slide In - M5
• 2x Heat Set Insert - M3 - 4.8mm OD - 4.6mm L - Flanged
• 2x Screw - Flat Head - M3x20
• 1x 2020 Aluminum Extrusion - 250mm
• 1x 2020 Aluminum Extrusion - 200mm
• 20x Heat Set Insert - M3 - 5mm OD - 4mm L
• 4x Screw - Bambu - BT3x14
• 2x Strap Buttons
• 1x Jack - Output - Mono 1/4in