ExoGuitar - Bộ cánh (Wing Sets) - Kiểu Kumiko

Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com

Plan Your Build & Get Hardware

ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoGuitar parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.

You can find this specific part, ExoGuitar - Wing Sets - Kumiko, on our site.

This one involves more glue than the rest

Step 1: Glue face plates to Front Panels

Step 2: Proceed as if this was any other wing set

Mount to 2020 using M5x10 screws and slide-in nuts.
Glue pieces together as you connect them to the 2020. Put in all electronics. Make sure all electronics work (because you're gluing this shut)

Step 3: Glue on back panels

Hardware

DIY Kit

You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $16.44 plus shipping.

Self Source

If you want to order the parts yourself, here's a list. Estimated cost: $95.23.

• 12x Screw - Button Head - M5x10
• 12x Nut - Slide In - M5
• 2x Heat Set Insert - M3 - 4.8mm OD - 4.6mm L - Flanged
• 1x Screw - Flat Head - M3x35
• 1x Screw - Flat Head - M3x45
• 1x 2020 Aluminum Extrusion - 300mm
• 1x 2020 Aluminum Extrusion - 250mm
• 2x Strap Buttons
• 1x Jack - Output - Mono 1/4in