ExoGuitar - Phần Vai - Single Cut

Part of the ExoGuitar project — full catalog, build planner, and assembly guides at https://exoguitar.com

Plan Your Build & Get Hardware

ExoGuitar can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoGuitar parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.

You can find this specific part, ExoGuitar - Shoulders - Single Cut, on our site.

Step 1: Insert Carbon Fiber Rod (Optional)

For extra stiffness, cut a 3x6 Carbon Fiber bar until you have 1x 50mm length of it.

Locate the rectangular hole on the bottom of the shoulder

Make sure that any support material in this hole has been removed. It's a tight fit.

Put some CA glue in that hole.

Using a small hammer, tap in the 3x6 Carbon Fiber Bars until they are fully seated in the shoulder.

Step 2: Tap 2020

Tap the end of the 2020 with a M6 Tap

Repeat for the other 2020

Step 4: Mount Shoulder to 2020

Using 2x M6x20 screws, mount the Shoulder to the top of the 2020's.

Using 3x M5 Slide In Nuts and 3x M5x16 SHCS, secure the front of the shoulder to the 2020.

Step 5: Mount Neck

Using 4x M5x35 SHCS and 4x M5 Slide In Nuts, attach the neck to the shoulder.

Hardware

DIY Kit

You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $15.31 plus shipping.

Self Source

If you want to order the parts yourself, here's a list. Estimated cost: $51.85.

• 7x Nut - Slide In - M5
• 4x Screw - Socket Head - M5x35
• 3x Screw - Socket Head - M5x16
• 2x Screw - Button Head - M6x20
• 1x Carbon Fiber Bar - 3x6x450mm