ExoBass - Wing Sets - Hex Splat

Part of the ExoBass project — full catalog, build planner, and assembly guides at https://exobass.com

Plan Your Build & Get Hardware

ExoBass can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoBass parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.

You can find this specific part, ExoBass - Wing Sets - Hex Splat, on our site.

⚠️ This wing set is a prototype and is not as polished as the others. Assemble at your own risk.

ℹ️ This wing set requires a 2020 cut to 970mm and not 930mm

Step 1: Heat Set Inserts

Using a soldering iron, insert the top and bottom heat set inserts

Step 2: Strap Mounts

Put together the Strap mount assemblies

Step 3: Glue in face plates

Step 4: Attach to core

Step 5: Electronics

Step 6: Optional Pickups

If you would like to attach either the Lace Ultra Thin Pickup or the Over String Pickup Mount to this WingSet, you will need to print and install the Pickup Core.

Hardware

DIY Kit

You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $8.68 plus shipping.

Self Source

If you want to order the parts yourself, here's a list. Estimated cost: $75.98.

• 12x Screw - Button Head - M5x10
• 12x Nut - Slide In - M5
• 2x Heat Set Insert - M3 - 4.8mm OD - 4.6mm L - Flanged
• 10x Screw - Flat Head - M3x10
• 10x Screw - Flat Head - M3x20
• 20x Heat Set Insert - M3 - 5mm OD - 4mm L
• 2x Strap Buttons
• 1x Jack - Output - Mono 1/4in