
Logo Judas Priest để bàn hoặc treo tường
- Downloads
- 10
- Likes
- 8
- Views
- 66
- Remixes
- 0
- Comments
- 0
Files 3 509.1 KB
- Judas_Priest_HB_1785493998.stlSTL · 139.2 KB
- Judas_Priest_1785493999.stlSTL · 301.3 KB
- JP_Algin_Jig_1785494000.stlSTL · 68.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #417015
- Category
- Đồ Gia Dụng
- Published
Description
You've got another thing comin'! This release is a special double-feature addition to my Slave To The Metal 90s Drawing Series /Collection, where I am systematically turning my original hand-drawn concept art of classic band logos into clean, printable display pieces.
This plaque brings the sharp, lightning-fast, classic typography of Judas Priest straight to your 3D printer. To give you total control over how it looks on display, I have included two design variants:
-
Standard Base Version: Features a solid backing plate contoured perfectly to the outline of the iconic text for a clean, classic plaque aesthetic.
-
Hidden Base Version: Features a recessed, low-profile connecting bridge between the letters. This variant keeps the text structurally stable as a single piece while letting the individual letters pop out like standalone wall art.
NEW! Includes Mounting Alignment Tool: Because of the aggressive angle of the lettering, the two rear keyhole slots are offset at an angle rather than sitting on a straight horizontal line. To make installation effortless, I designed a printable Screw Alignment Tool/Template! Simply hold the template flat against your wall, use a small bubble level along the guide lines, and mark or drill through the slot centers for perfect screw alignment.
Important Mounting Note: Because of the tight spacing and thin profiles inherent to this specific legendary font, I had to reduce the size of the built-in keyholes on the back. Both variants feature (2) reduced keyhole slots specifically sized for a #2 screw head (0.153” / 3.88mm) or small finish nails to guarantee a completely flush wall mount without pushing through the front faces!
Multi-Color Filament Swapping Tip:
-
For the Standard Base: Slice it flat on its back and add a filament change right where the base plate transitions into the raised text borders to make the logo instantly pop against a dark background.
-
For the Hidden Base: Try printing the low-profile hidden bridge variant in a clear or wall-matched filament to achieve a completely floating text look!
Dimensions
-
Width: 8”
-
Height: 8”
-
Thickness: 0.5”
-
Inset: 0.125”
-
Mounting: Features (2) custom-sized keyhole slots on the back (designed specifically for #2 / 0.153" screw heads or small nails) for perfectly flush wall hanging. Includes matching Alignment Jig.
Print Settings
-
Material: PLA
-
Layer Height: 0.12mm to 0.20mm (Lower layer heights yield incredibly smooth results across the blocky angles of the letters).
-
Infill: 10% or higher (Gyroid or Grid patterns work beautifully for stability).
-
Supports: None required when printed flat on the bed.
Where It All Began:
Curious about the original hand-drawn concept art that inspired this whole series? Check out the model that started it all:
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 509.1 KB
- Largest file
- 301.3 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-

-

-
New -


