
Nắp che cửa sau Nikon Coolscan V ED cho bản mod full roll
- Downloads
- 1
- Likes
- 0
- Views
- 62
- Remixes
- 0
- Comments
- 0
Files 2 450.1 KB
- Coolscan_V_Full_Roll_Door_Mod_1785481737.3mf3MF · 116.3 KB
- Coolscan_V_Full_Roll_Door_Mod_1785481738.stepSTEP · 333.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #416908
- Category
- Dụng Cụ Tiện Ích
- Published
Description
Do you want to scan a whole roll, uncut with your Coolscan V? This is how to do it!
What you need:
-
A Coolscan V ED with the custom firmware installed from coolscan-mods GitHub
-
Spools for the front and back of the scanner by mmsaxer1998 on Thingiverse
-
Improved parts for the spools by Novar Lynx on Printables
Next you will need to cut a hole into the back of your scanner. Intimidating, I know. You'll need to disassemble the scanner almost entirely to get the bent sheet metal panel out for cutting. I used a dremel for a rough cut, followed by filing the rest manually. I printed the template from coolscan-mods and it worked great:
Next you need to drill and tap some M3 threads into the back panel:
Once that's done, test fit the 3D printed parts I've uploaded here. The two rigid parts are a tight snap fit, but I added a small amount of glue as extra insurance. The door itself is printed out of TPU and secured with two M2 screws so it stays fixed to the scanner.
Print spec
- Formats
- 3mfstep
- Model files
- 2
- Total size
- 450.1 KB
- Largest file
- 333.8 KB












