Skip to main content
F3D
Universal Buffer Tube Sling Point - Điểm gắn dây đeo đa năn… 1

7 images

Đồ Chơi Ngoài Trời

Universal Buffer Tube Sling Point - Điểm gắn dây đeo đa năng cho Blaster

Remix of Ngàm gắn dây đeo (Sling Mount) cho Buffer Tube của Nexus Pro / Mk-3 By OUTOFDARTS

By LikeThePlatypus

Downloads
3
Likes
3
Views
68
Remixes
1

Files 2 491.6 KB

  • LikeThePlatypus_BUFFER_TUBE_SLING_MOUNT_HSI_1785269102.3mf3MF · 245.8 KB
  • LikeThePlatypus_BUFFER_TUBE_SLING_MOUNT_SQUARE_NUT_1785269103.3mf3MF · 245.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

The Universal Buffer Tube Sling Point is a straight remix of the popular Nexus Pro sling point designed by Luke at Out of Darts. Replacing the blaster-specific knurling with a smooth inner surface, and adding a relief cut at the top, this low-profile sling point now snuggly clamps onto most buffer tube stock points available on high-powered nerf blasters. Its ambidextrous lower loops allow it to fit most ergonomic preferences. Additionally, the sling point can be secured as an extra stop to record a preferred stock length or in-between setting. Available in the original square nut, and my preffered heat-set insert version.

FEATURES:
• Universal Buffer Tube Sling Point
• Adds a convenient sling point to compatible blasters
• Simple installation, slide on and tighten one screw
• Ambidextrous dual-sided design
• Attach directly or use a loop of paracord
• Compatible with most Buffer Tube stock points on blasters

RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: At least 3 wall loops, 20% Infill

HARDWARE NEEDED: • 1 M3 x 6.4mm Heat-Set Insert
• 1 M3 x 16-18mm Socket Head Screw

or

• 1 M3 Square Nut
• 1 M3 x 14mm Socket Head Screw

Read more Show less

Print spec

Formats
3mf
Model files
2
Total size
491.6 KB
Largest file
245.8 KB

0 comments

See all