Chuyển đổi nút bấm cho micro đeo vai Baofeng

You will need a #6 x 3/8" metal screw to assemble this If you use a 1/2" screw you will have to grind off a bit after assembly (like I did) or it will put pressure on the PCB inside the mic. I used a cheap Baofeng shoulder mic with the lapel clip. Just take apart the mic and remove the clip. This one had a plastic clip and base. Some have a plastic clip and metal plate. I don't know if those will work. I'm sure there are different version of this mic so your mileage may vary. I used PLA, 25% infill and supports.