Skip to main content
F3D
Khay Để Đồ Cho Chân Đế Kính Thiên Văn AZ-EQ5 Pier 1

2 images

Giáo Dục

Khay Để Đồ Cho Chân Đế Kính Thiên Văn AZ-EQ5 Pier

By tbrymer_796273

Views
29

Files 1 262 KB

  • az-eq5_pier_tripod_shelf_1784888229.iptIPT · 262 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#415766
Category
Giáo Dục
Published

Description

Molded-in recesses for 1.25" and 2" eyepieces mean no fumbling with caps in the dark.

I printed in white PETG with 8 perimeters and 25% infill.  The result is really sturdy and looks like it came from the factory. 

This shelf slides snugly over the pier tube.  To install it, you need to disconnect either the top or the bottom of the tube.  The bottom is probably easier (3 screws) but on mine, they were installed too tightly to remove.   Disconnecting the top only takes minute though:

  • Remove the 3 screws holding the pier top plate to the tube

  • Loosen the allen screw on the flex shaft coupler

  • Remove the drive screw from the flex shaft coupler

  • Remove the flex shaft 

With one end disconnected, slide the shelf onto the tube and reassemble.

Read more Show less

Print spec

Formats
ipt
Model files
1
Total size
262 KB
Largest file
262 KB

0 comments

See all