Skip to main content
F3D
Voron 350mm Extra Tall Top Hat - Nâng cấp chiều cao cho Vor… 1

4 images

Máy In 3D

Voron 350mm Extra Tall Top Hat - Nâng cấp chiều cao cho Voron 2.4

By jtmx101_21088

Downloads
4
Likes
8
Views
630

Files 2 180 MB

  • 2.4r2-350_from_hartk_-_Sir_Topham_Hat_mods_1784619002.stepSTEP · 5.7 MB
  • 2.4r2-350 from hartk -Sir Topham Hat mods.f3dNot available yet

Make a variant with AI

Build another version of this model.

Open Studio

Description

Extra Tall Modified Top Hat - 350mm Voron 2.4 and Trident

This mod increases Z clearance height by 110mm and improves cable management (Can Bus / Umbilical style) by raising the top. Requires re-routed cabling and filament path (not shown)

  • Standard Build: Gave me 348mm total Z travel on a stock OG V2.4 build. (tested with LDO rails, Rapido UHF A4t, and stock gantry/table).

  • Modified Build: Up to 355mm MAX Z if you shift the Z rails up a few mm. (results may vary, works on mine)

Print Specs

  • ABS (40% Fill Voron Specs)

  • TPU seam fill (100% Fill) — You may need to tune the thickness or substitute with foam/foam tape.

Hardware

  • Square nuts M3 - 8 pcs

  • M3 T nuts - 16

  • M3 x 8 or 10mm SHCS to mount to frame. - 16

  • M3 x 4mm SHCS for color accent plugs. (or glue. Or M5 with washers, too long screw pokes thru)

Design

  • Z Clear for Toolhead: Designed to clear Nighthawk 36 or Can Bus tool head cabling. Cpap Etc

  • Appearance: Classic Aesthetic that fits the original

  • Flat Rear Panel: Flat Blank Plate to mod for fans, cable/filament routing, etc.

  • Lighting: Includes LED strip clearance and specific "light pocket" areas (with zip-tie grooves).

  • Customization: Uses a standard hex pattern for adding buttons or color chips.

  • Assembly: Uses stock top and printed corner clips.

I intended to make a smooth and dialed model here. That didn't happen. It works, but it could be way more dialed.  If folks like it, I'm sure they can refine it way better.

Super shallow M3 screws to hold color insert plates or it'll poke thru. Also that.

Read more Show less

Print spec

Formats
f3dstep
Model files
2
Total size
180 MB
Largest file
174.3 MB

0 comments

See all