
Cảm biến chất lượng không khí (Air Quality Sensor)
- Downloads
- 0
- Likes
- 1
- Views
- 26
- Remixes
- 0
- Comments
- 0
Files 5 406 KB
- Air_Quality_sensor_r3_-_lower_front_1784617818.stlSTL · 684 B
- Air_Quality_sensor_r3_-_top_and_back_1784617819.stlSTL · 36.7 KB
- Air_Quality_sensor_r3_-_bottom_1784617819.stlSTL · 269.4 KB
- Air_Quality_sensor_r3_-_front_screen_1784617820.stlSTL · 4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #414321
- Category
- DIY
- Published
Description
Printed with PETG. Note you will need to print two of the "side panel" models. Everything fits on a standard printer bed. No supports needed.
Assembly required with superglue + screws.
Screws used: 3x M3 x 20mm (specifically this - https://a.co/d/0b8GzKCX (out of stock))
Items required:
-
Raspberry Pi Pico W (or 2W), without headers.
-
Sensirion SPS30
-
BME680 (or BME688) - I used the Adafruit one - https://www.adafruit.com/product/5046
-
Soldering iron
-
Estardyn TFT ST7789 display (2.25") - this screen is pretty bad but the model was designed around it. And it's only $1. https://www.aliexpress.us/item/3256808733718879.html
Software:
-
Compiling and pushing the code to the Raspberry Pi is required. More info, including a wiring diagram, can be found on the Github page (WIP but working) - https://github.com/corey-schneider/air-quality
-
Integration with Home Assistant using MQTT. Instructions in the github link.
Print spec
- Formats
- stl
- Model files
- 5
- Total size
- 406 KB
- Largest file
- 269.4 KB
0 comments
You may also like 12 models
See all-
New -
New -

-

-

-

-

-

-

-

-
New -
New

