
Móc Khóa và Dây Đai Parawing (Parawing Hook and Harness)
- Downloads
- 0
- Likes
- 2
- Views
- 42
- Remixes
- 0
- Comments
- 0
Files 2 738.4 KB
- Para_hook_v7_1784398004.stlSTL · 267.3 KB
- Para_Hook_Harness_1784398005.stlSTL · 471.2 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #414257
- Category
- Thể Thao & Ngoài Trời
- Published
Description
Custom Built Hook and Harness line attachment for BRM Kanaha bar (23mm Diameter) Ozone Stash Belt (40 x 5 mm), & 4mm Dyneema line.
*some of the photos are of the thicker prototype. Final print is 10mm thick.
Print Settings — Tether Hook (PETG)
-
Material: PETG (avoid PLA — degrades in UV/saltwater; PETG-CF requires a hardened steel nozzle)
-
Nozzle temp: 250–255°C
-
Bed temp: 70–80°C
-
Fan speed: 20–30% (lower than PLA default for better layer fusion)
-
Layer height: 0.2mm
-
Wall loops: 6
-
Top/bottom shell layers: 6, 100% density
-
Infill: 80% density, Gyroid pattern
-
Outer wall speed: 60mm/s
-
Inner wall speed: ~150mm/s
-
Infill speed: ~130mm/s
-
Seam: Smart scarf seam application enabled, scarf joint for inner walls enabled
-
Brim: Auto, 5mm width (recommended — PETG warps more than PLA)
-
Orientation: Print flat, as oriented in the provided file — this loads the part in-plane rather than across layer lines and is critical for strength; do not reorient
Post-print (recommended):
-
Pull-test each part to failure before trusting it with real load
-
Apply UV-rated clear coat for extended sun exposure
-
Design margin: rated for 75–100 lbs dynamic load with a 3–5x static safety factor.
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 738.4 KB
- Largest file
- 471.2 KB












