Adapter chuyển đổi van Schwalbe Clik cho SKS Airchecker

An adapter for simple tire pressure measurement with a Schwalbe Clik Valve and an SKS Airchecker. The Schwalbe / SKS CLIK Valve SCV pump head adapter is also required: https://www.sks-germany.com/en/Products/Pumps/CLIK-TEC-Adapter-for-Pump-Heads.htm?a=article&ProdNr=12068&p=1008

To install it, the darker plastic ring around the SKS Airchecker's coupling must first be removed. It is held in place just by a bayonet mount. A small counter-clockwise turn is all it takes, then the ring can be pulled off. I used the side with the Schrader valve because I don't need it.

The upper part of the Schwalbe / SKS CLIK Valve SCtire V pump head adapter (rubber-coated) can be easily unscrewed from the lower part with the Schrader adapter (threaded part). When assembling the printed adapter, it is important to reinsert the small rubber seal which is located inside!

I printed the adapter on my Core One with a layer height of 0.1 mm and it works without issues up to 4 bar. I don't need any more pressure.

For information: The thread of the Schwalbe / SKS CLIK Valve head is 0.5 in x 1 mm 😉.