Hệ thống ngăn kéo tam giác Modular

Welcome!

Please note these are Blender renders—I don't own a 3D printer to test-print. The CAD tolerances are precise, but I would highly appreciate your feedback. If you print this, please share a "Make"!

MODULAR TRIANGULAR DRAWER SYSTEM A modular desktop organizer inspired by Nanoleaf and IKEA Kallax. Stack and expand in any direction (even tip-down) without glue, magnets, or screws.

KEY FEATURES & SPECIFICATIONS

• Modular: Easily scale your organizer in any direction.

• Solid Walls: 2mm outer walls print completely solid using only perimeters.

• Side Length: 70 mm

• Depth: 80 mm (internal drawer cavity: 78 mm)

• Drawer Clearance: 0.1 mm on each side for a smooth slide.

PRINTING & ASSEMBLY (See buildplate screenshots)

• Plate 1: Main Frame & Connectors (flat on back, no supports). Use 5 perimeters for solid walls.

• Plate 2: Drawers with Handles (flat on bottom, minimal supports under handles).

• Plate 3: Open Bins (flat on bottom, supportless).

• Assembly: Align frames and slide Active Connectors into adjacent slots. Use Blank Covers on exposed outer edges.

VISUAL GUIDE TO STL FILES

• Black: Main Frame

• Black: Blank Cover (left) & Active Connector (right)

• Red / Yellow: Closed Drawers with handles (Wide / Narrow)

• Green / Blue: Open Bins without handles (Wide / Narrow)

If you like the design, please drop a like!