
02_Box SD 2 - Hộp đựng thẻ nhớ thông minh
- Downloads
- 7
- Likes
- 1
- Views
- 47
- Remixes
- 0
- Comments
- 0
Files 3 3.3 MB
- SD_5_2_V_1784363816.stlSTL · 193.7 KB
- SD_5_2_N_1784363817.stlSTL · 1.4 MB
- SD_5_3_N_1784363818.stlSTL · 1.8 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #413638
- Category
- Dụng Cụ Tiện Ích
- Published
Description
02_Коробка SD 2
Коробка с фиксируемой выдвижной крышкой для одной SD-карты и двух MicroSD. Крышка требует обработки уклонов с внутренней стороны, от этого зависит лёгкость и плавность работы. Открывать крышку, нажав сверху и сдвинув на 6–9 мм. Дальше крышка свободно движется до следующего ограничителя открытия. Для извлечения карты переверните коробку. Дальнейшее движение откроет коробку до следующего упора. В коробке предусмотрено углубление для лёгкого извлечения карты нажатием.
02_Box SD 2
A box with a fixed sliding lid for one SD card and two MicroSD cards. The lid requires processing on the inside, which affects the ease and smoothness of operation. To open the lid, press from above and slide 6-9 mm. The lid then moves freely until it reaches the next opening limit. To remove the card, turn the box over. Further movement will open the box until it reaches the next stop. The box has a recess for easy card removal by pressing.
00_Box SD. Box with a fixed sliding lid for SD card.
How to fasten the thread
CC BY-NC-SA
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 3.3 MB
- Largest file
- 1.8 MB












