
Đồ Gia Dụng
Phụ kiện giữ mở cổng chặn cầu thang Safety 1st
- Downloads
- 15
- Likes
- 2
- Views
- 325
- Remixes
- 0
- Comments
- 0
Files 1 18.7 MB
- T3DS_StairGateOpen_v2_1784339085.stlSTL · 18.7 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #412910
- Category
- Đồ Gia Dụng
- Published
- License
- Standard Digital File License
Description
This was designed to be used on the Safety 1st Auto-closing Stair Gate for those times that you actually don't need it to be closed and what to hold it open.
Please keep in mind that once kids are around it is wise to remove it and get the gate closed again.
Printing instructions:
You want this part to be robust so here is what I recommend.
- 0.2mm Layer Height
- 3 Perimeters
- 25% Infill
- Print on the position below to avoid delamination between layers while using.
- Supports are only needed for the start of the top inner edge, after that is 45degrees overhang so your printer will manage without supports.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 18.7 MB
- Largest file
- 18.7 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-

-

-


