
Núm vặn 4 cánh cho bu lông đầu lục giác M5
- Downloads
- 6
- Likes
- 4
- Views
- 43
- Remixes
- 0
- Comments
- 0
Files 2 425.4 KB
- M5_Four_Lobe_Hex_Knob_v1_1784109985.stlSTL · 282.9 KB
- M5_Four_Lobe_Hex_Knob_hat_v1_1784109985.stlSTL · 142.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #412119
- Category
- DIY
- Published
Description
Four-Lobe Knob for an M5 Hex-Head Bolt
A simple four-lobe knob designed to fit an M5 hex-head bolt. The larger grip makes the bolt easier to tighten and loosen by hand without tools. Suitable for adjustable fixtures, clamps, jigs, machine accessories and other projects that require frequent manual adjustment.
For best results, print the clips flat on the build plate using the original STL orientation.
Dimensions
-
Maximum assembled diameter: 20 mm
-
Assembled knob body height: 10 mm
-
Neck diameter: 10 mm
-
Neck height: 7 mm
-
Total assembled height: 17 mm
Note
The same version of this model is also available on Thingiverse. For documentation, printing instructions, updates, and the changelog, visit: https://www.thingiverse.com/thing:7382397
License
Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
You are free to:
-
Share — copy and redistribute the model in any medium or format
-
Adapt — remix, transform, and build upon the model
-
Use commercially
Under the following terms:
-
Attribution — You must give appropriate credit to the original author
-
ShareAlike — If you modify the model, you must distribute your contributions under the same license
This model is provided as-is, without warranty. Use at your own risk.
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 425.4 KB
- Largest file
- 282.9 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-
New -
New -

-


