Giá đỡ béc phun sương

We use a misting system to help cool down our veranda. The system uses PA tubing with metal connectors. Misting nozzles (or extenders) are screwed into the connectors.

I designed a nozzle mount that can hang on an aluminium profile (1.5-2mm thick) in the veranda. The metal connector clicks into the mount; the misting nozzle (or extender) is screwed into the connector via the hole in the bottom of the mount.

Use Tesa double-sided tape (suitable for outdoor, high temperature range) on the back of the mount; this way, the mount stays put and you don't need mounting screws.

Printed in Prusament PETG; back of the mount was lightly sanded to provide better adhesion for the double-sided tape.

As shown in the pictures, mount can be printed in multiple orientations; supports are needed ("organic" supports recommended).