Macropad 4x4 (16 phím cơ học)

[NOTE: Certain patterning on the MCU Cover as seen in the photo have been removed from the CAD, it being a personal symbol of sorts. Feel free to edit the file to add whatever pattern desired]

16 key (4x4) macropad STEP and STL files.

Runs on an Arduino Pro Micro (CAD made around the board with soldered header pins), with the firmware created using QMK. Takes Kailh Box Cream Pro and Kailh Box Jade switches (snaps fit on Switch Plate). This uses Kailh hot-swap sockets (snaps fit on Switch Socket Plate)

The keykaps are designed to friction fit on the switches in a way that they can be removed without taking the stitch off the plate. However, depending on printer tolerances, feel free to edit the keycap stems.