
Little Boy S 200mm - Case mini ITX tùy chỉnh
Remix of Little Boy S - Vỏ Case Mini ITX Siêu Nhỏ Gọn By makerunit_735717
- Downloads
- 2
- Likes
- 3
- Views
- 74
- Remixes
- 0
- Comments
- 0
Files 1 7.9 MB
- v13_motherboard_side_panels_10_1784108873.3mf3MF · 7.9 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #411864
- Category
- Dụng Cụ Tiện Ích
- Published
Description
I hacked together the top, bottom, and side panels in my slicer to make them 10mm longer, fitting a 200mm GPU such as the PowerColor 9060 XT Reaper.
Added clearance above the GPU to fit the ports of the PowerColor 9060 XT Reaper, and raised the edge below. See images.
Moved the IO shield cutout by 1mm to align it with my motherboard. Not sure why that was necessary.
Changes are made entirely by adding/subtracting volumes in the slicer.
Laid out on individual plates with two colors.
Parts in my build:
-
Ryzen 7 5700X3D
-
ASRock Fatal1ty B450 Gaming-ITX/ac
-
Corsair SF600 (Gold) PSU
-
32GB DDR4 RAM
Additional hardware:
-
5x M3 heat set inserts (Ø5mm, standard M3 inserts from CNC Kitchen do not fit)
-
4x M3 10mm screws
-
1x M3 6mm screw (or an additional 10mm)
-
8x 8x3 magnets
Tweaked the following settings:
-
0.6mm extrusion width for sparse infill
-
25% honeycomb infill at 30° to make the lines vertical
-
front panel has 'make overhangs printable' at 45° to avoid sagging overhangs from the rounded corners (only in Orca?)
Print spec
- Formats
- 3mf
- Model files
- 1
- Total size
- 7.9 MB
- Largest file
- 7.9 MB












