Tủ Đựng Linh Kiện Mô-đun (Modular Hardware Drawers)

This is a spinning modular hardware cabinet, it can be stacked infinity with different drawers, tops, labels, and an optional turn table. 

NOW AVAILABLE: MK1 MISSILE PACKAGE

I designed this model to be 100% 3D printed on a Prusa Core one, as a result it requires ZERO non 3D printed components. I also put an emphasis to design with minimal support structure and ZERO split pieces, as well as giving design consideration to use default Prusa slicer setting with the exception of its minimally required supports. 

Instructions:

• Turn Table (print with supports)

  • 1. Remove support structure from pin holes carefully as not to break them.

  • 2. Insert wheel and push pin through, the wheel can face either direction.

  • 3. Remove support from the top plate and insert keys. 

  • 4. Combine both halves, it will be stiff at first but will quickly spin very nicely. 

  • 5. The shelving structure will press firmly onto the keys. 

• Shelving Structure: (print with support)

  • 1. Print shelving structure, one per level, and remove support structure. 

  • 2. Carefully place 4 desired shelves on hinge pins. 

  • 3. Press next shelving structure on top, hinge pins are fragile until this part is installed. 

  • 4. Finish with a top plate of your choice. 

• Labels

  • 1. Text can be added in Prusa slicer 

  • 2. Print and slide into desired shelve, note you print the correct size. 

• Missile Kit (print with support)

  • 1. The fin section connects to the bottom of the turn table. 

  • 2. The nose cone replaces the top plate.