
Cần gạt thay thế cho ổ đĩa mềm Panasonic JU-455
- Downloads
- 2
- Likes
- 1
- Views
- 29
- Remixes
- 0
- Comments
- 0
Files 3 122.6 KB
- ju455-lever_1784101897.stlSTL · 21.5 KB
- Panasonic_JU-455_Lever_1784101898.f3dF3D · 85.9 KB
- Panasonic_JU-455_Lever_1784101899.stepSTEP · 15.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #411375
- Category
- Dụng Cụ Tiện Ích
- Published
- License
- GNU General Public License v3.0
Description
A replacement lever for a Panasonic JU-455.
The drive I bought lacked the lever which makes it rather difficult to use. This is a part created entirely without the original part, only referencing the metal rod on the drive and photos, so don't expect this to be a 1:1 match.
You can of course print this in any colour, I only printed it in white as that's what I had loaded in my printer at the time. Printed on my Prusa MK4S.
I recommend you print with 3 (or more) walls and 40% infill. It does need to be a strong part. ABS may not be the best choice due to shrinkage, and PLA may be too brittle. PETG was my choice and it worked great.
Please note: this is a friciton-fit part, so your printer's tolerances need to be dialled in well. I've included the original F3D file as well as a STEP file in-case you'd like to modify the opening to work better with your printer / floppy drive.
Print spec
- Formats
- f3dstepstl
- Model files
- 3
- Total size
- 122.6 KB
- Largest file
- 85.9 KB












