Skip to main content
F3D
Nắp đậy cổng sạc Bosch & Cube Hybrid (2025 - 2026) 1

5 images

DIY

Nắp đậy cổng sạc Bosch & Cube Hybrid (2025 - 2026)

By Manfred_1418480

Views
42

Files 6 1.4 MB

  • Base1_1784101362.stlSTL · 186.7 KB
  • cap1_1784101363.stlSTL · 80.5 KB
  • Base_1784101364.stlSTL · 188.4 KB
  • cap_1784101365.stlSTL · 69.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Bosch & Cube Hybrid (2025 - 2026) Ladesteckerabdeckung / Ladeport-Schutz

Diese Abdeckung schützt den Akku-Ladeport deines E-Bikes effektiv vor Nässe, Staub und Schmutz. Das Set besteht jeweils aus 1 Kappe und 1 Halterung. Ich habe zwei verschiedene Versionen hochgeladen, damit du die für dich passende Variante wählen kannst.

⚠ WICHTIGER HINWEIS: Dies ist ein Work in Progress (WIP). Ich habe die Modelle noch nicht am physischen Bike getestet und arbeite aktuell noch an den finalen Versionen. Feedback aus der Community ist ausdrücklich erwünscht!

🛠 Open Source / Remix: Ich habe die Fusion 360 Quelldateien (.f3d) für beide Versionen hochgeladen. Du kannst sie gerne herunterladen, modifizieren und das Design direkt weiterentwickeln!

💡 Featurer

  • Perfekter Schutz: Hält Spritzwasser und Schmutz vom sensiblen Ladeanschluss fern.

  • Sicherer Halt: Inklusive Halterung, damit die Kappe während der Fahrt oder beim Laden nicht verloren geht.

  • Passgenau: Speziell für Cube Hybrid Modelle (2025 - 2026) mit Bosch-System entwickelt.

🛠 Druckempfehlungen

  • Materialien: PETG (wetterfest & stabil) oder ASA (extrem UV- und witterungsbeständig, ideal für

  • Tipp für ASA: Achte auf ein gut kalibriertes Bett und ggf. einen geschlossenen Bauraum, um Schrumpfung (Warping) bei feinen Kanten zu vermeiden.

Bosch & Cube Hybrid (2025 - 2026) Charging Plug Cover / Ladeport Protection

This cover effectively protects your e-bike's battery charging port from moisture, dust, and dirt. Each set includes 1 cap and 1 holder. I have uploaded two different versions so you can choose the one that fits your needs best.

⚠ IMPORTANT NOTE: This is a Work in Progress (WIP). I have not tested these models on a physical bike yet and am still working on the final versions. Feedback from the community is highly appreciated!

🛠 Open Source / Remix: I have included the Fusion 360 source files (.f3d) for both versions in the downloads. Feel free to open them, modify them, and continue developing the design!

💡 Features

  • Perfect Protection: Keeps water splashes and dirt away from the sensitive charging port.

  • Secure Fit: Includes a dedicated holder so you won't lose the cap while riding or charging.

  • Tailored Fit: Designed specifically for Cube Hybrid models (2025 - 2026) with Bosch systems.

🛠 Print Settings

  • Materials: PETG (weatherproof & durable) or ASA (highly UV and weather-resistant, perfect for outdoor use).

  • Tip for ASA: Ensure a well-calibrated print bed and use an enclosure if necessary to avoid warping on tight tolerances.


Read more Show less

Print spec

Formats
f3dstl
Model files
6
Total size
1.4 MB
Largest file
478.4 KB

0 comments

See all