Skip to main content
F3D
Ốp che ổ cắm ngoài trời GFCI 1

3 images

Đồ Gia Dụng

Ốp che ổ cắm ngoài trời GFCI

By leif_3d_110474

Downloads
2
Views
28

Files 4 5.6 MB

  • cover_extended_1783850324.stlSTL · 1.2 MB
  • pin_1783850325.stlSTL · 2.6 MB
  • cover_1783850326.stlSTL · 1.3 MB
  • base_1783850327.stlSTL · 508 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a modification of mrpirkle's outdoor outlet cover. I needed a good outlet cover and their design was great, though it was too big to fit on the side of my outdoor power box and it wasn't ideal for the straight plugs I was using to power LED lights.

The box is sized to fit standard GFCI type outlets. It's primarily designed for straight end plugs with fairly flexible wires that can exit the bottom opening. The cover locks into place and the box has a water resistant channel to protect against rain and sprinklers. A foam gasket or seal of some sort is recommended for the back.

The print quality on my example isn't the greatest. I'm still struggling to get good PETG prints out of my Ender-3 S1, but it's functional and you might get better results.

UPDATE 8/27/2022:

  • I added an extended version of the lid. This lid is about half-an-inch deeper in interior depth than the regular lid so it might help if you have something bulky like a Wi-Fi smart plug plugged into your outlet.

My Print Settings

  • Printer: Creality Ender-3 S1

  • Rafts: No

  • Supports: Yes

  • Resolution: 0.2

  • Infill: 100%

  • Filament: PETG

Notes: Slice the base and lid with the opening facing up. You'll only need supports along the overhangs at the top and the hinge section. The pin can be printed vertically. Print at a high infill percentage (probably >50%) for maximum strength. Strongly recommend using PETG for this. PLA will likely need to be coated to better withstand the elements.

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
5.6 MB
Largest file
2.6 MB

0 comments

See all