Giá đỡ Dolphinbar cho Framework Laptop 16

A 3d printable mount for the Mayflash Dolphinbar that fits over the top of the Framework Laptop 16 display.  It includes a cutout for the webcam, ambient light sensor, and the privacy switches.  It requires mild force when attaching to or removing from the display (at least on my print, yours may vary due to tolerance differences on your printer setup)

I would suggest turning supports on for the main part, with the large flat surface that the Dolphinbar sits on touching the bed.  

The holes in the main part should be filled with dowels of 4mm diameter and 6mm length (you can probably get away with longer, I didn't have proper measuring tools and so was unable to accurately determine depth, plus it should be fine if it rests only on the dowels).  If using the provided 3d models, you may find that they have too little clearance (I personally had significant difficulty press-fitting them, although they then did not require glue), so you may wish to scale them down and glue them.

The original design was made in OnShape.  The document link is https://cad.onshape.com/documents/a9711cf893fd8237554e6675/w/c29a1a2c27aede586b75c37d/e/b9b5ae3d371ca433e0360f2c?renderMode=0&uiState=661d57a3e39c7600f4d421fc