Giá đỡ GPU RGB hình lục giác

• An RGB hexagon shelf to put miniatures inside your PC, also a GPU support/lifter.

• Feel free to remix on Tinkercad.

• Needs about 1-2.5 PCI slots under the graphics card.

• But of course, you can ignore the lifter and print the hex shelf only.

HOW TO BUILD - VIDEO

Wok-in-progress

HOW TO BUILD - DIAGRAM

PARTS LIST

These are my AliExpress affiliate links. They don't cost more, but I do make a small commission - That will help offset the costs of my future projects. 👍

• M3 Screws (2 X M3*8, 2 X M3*12)

• 2 X M3 Nuts

• 2 X M3 Washers - Optional. The support will "split" when tightened too much. You can get past with large screwheads and more infill, or print the spacer.

• 2-3 X 10*3 Magnets - Optional. You can use double-sided tape to hold the hex shelf down.

• 5V 3Pins 5mm WS2812B LED Cob Strip

MY PRINT SETTINGS

• PETG.

• 15% Gyroid Infill.

• At least 3 walls & 3 shell layers.

• 0.2~0.25mm layer height.

• No supports, no brim.

MINIATURE SIZE LIMITS

• Max height 31mm.

• Width at the base is about 18.2mm, center is 36.6mm.

• Depth is 23mm.

• Should fit some 1:12 miniatures, or just resize your 3D prints to fit.

• Miniature Plants | Flowers | Food | Drinks | Books |