Waveshare DS5 Dongle - Case cho DualSense sử dụng Waveshare RP2350B-Plus-W

I wanted a case for my DualSense dongle, so I modeled it up with inspiration from the other models already made. Both BOOT and RESET buttons are available to press, with the BOOT button marked differently by a small indent.

Get the USB-A version here.

This is meant for the Waveshare RP2350B-Plus-W board, not the standard Raspberry Pi Pico 2/2W.

There are two versions of the top case, the logo's orientation is up to your preference.

No supports are needed when printing. Use a 0.4mm nozzle, and any layer height is probably fine. No glue or hardware is needed to assemble, it is snap-fit!

The LED light bleed can be mitigated from propagating throughout the case by painting the inside of the case with any kind of opaque paint. I used a black Sharpie paint marker and it works great.

If you have any concerns, comments, or questions, please let me know.

Make a DualSense DS5 Dongle here: https://github.com/awalol/DS5Dongle

Thanks to these other models for inspiration. Download or print them too!