
Giá đỡ GE CT Phantom kèm thanh gắn Index Bar
- Downloads
- 0
- Likes
- 1
- Views
- 55
- Remixes
- 0
- Comments
- 0
Files 2 412.1 KB
- GE_CT_Phantom_Mount_1783585403.3mf3MF · 35 KB
- GE_CT_Phantom_Mount_STEP_1783585404.stepSTEP · 377.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #409229
- Category
- Sức Khỏe
- Published
- Tags
Description
Caveat: This fits the GE phantoms I have rolling around my department (these have been around for several generations of scanners). It's not clear how consistent GE was in manufacturing. It may need slight scale adjustments in slicer to get a good fit.
Basically snaps on the phantom (may need to do some twisting, but it should go). Allows for attachment to an indexing bar thus speeding setup. For me the most important daily laser check is that the side lasers are in agreement. The "thin window" test makes visible the "opposite" laser so that you can visually check for alignment very quickly -- run the phantom in just past the isocenter.
Includes holes for fiducials in a 10x10cm pattern. I used 2.5mm steel BB's for a press fit, but you could also use some "Beekley Markers" and a dab of glue. Allows for an efficient daily scale check in either X or Y direction.
Printing Notes: PRINT FLAT ON FLAT VERTICAL SIDE (LAYING DOWN) or the snap tabs that hold it on the phantom bracket will fail..
For profile, you can use about anything. You will need some few supports for the channel on the bottom where the index bar goes - Tree. Much easier with a mixed material support interface if you have the capability. 4 walls, 15% infill feels about right. Don't go with a dark color if you want to use the laser window.
Unfortunately this does require a larger printer to fit on the bed in one piece. However, It would work fine if split in slicer (with pegs) and glued together.
If the fit just doesn't work out, I've included the .step file which should make editing easier.
Print spec
- Formats
- 3mfstep
- Model files
- 2
- Total size
- 412.1 KB
- Largest file
- 377.1 KB












