Thanh Nối Dài Nút Còi Xe Scooter

Scooter Horn Switch Extender

Make your scooter's horn easier to reach with this Scooter Horn Switch Extender. This simple yet practical accessory extends the horn switch, reducing the thumb movement required to press it and making the horn more comfortable and accessible while riding.

Perfect for riders who want quicker access to the horn without permanently modifying their scooter.

---

🔧 Need a Different Size?

The version available here is provided with fixed dimensions.

If your scooter uses a different horn switch or you need a different size, you can download a fully customizable versionfrom my MakerWorld profile. The customizable model allows you to adjust the dimensions to fit your horn switch before downloading and printing.

---

🖨 Print Information

• Supports: ✅ Required

• Walls: 3 walls

• Infill: 10–15%

• Material: PLA or PETG

• Recommended Material: PETG

PETG is the preferred material due to its excellent durability, flexibility, and resistance to heat and outdoor weather conditions.

---

⚙ Printing Notes

• Print the model in the same orientation shown in the description images.

• Remove supports carefully for the best finish.

• Test the fit before final installation. Slight sanding may be required depending on your printer calibration.

This is the orientation you need to print for optimal strength:

---

⚠ Disclaimer

This model is designed to extend the horn switch for easier operation. Since scooter switch designs vary between manufacturers and models, the included version may not fit every scooter.

If you need to customize the dimensions, simply visit my MakerWorld profile and download the customizable version, where you can adjust the length and internal dimensions to match your scooter's horn switch before printing.