
Soma Stick - Thử thách xếp hình khối 3D độc đáo
- Downloads
- 5
- Likes
- 0
- Views
- 67
- Remixes
- 0
- Comments
- 0
Files 5 1.3 MB
- SquareHoleTool_1783342338.stlSTL · 66.5 KB
- somaBox_1783342339.stlSTL · 431.3 KB
- somaBoxSides_1783342341.stlSTL · 297.6 KB
- somaPieces_1783342342.stlSTL · 343.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #408504
- Category
- Đồ Chơi Trí Tuệ
- Published
Description
Soma Stick
A “Soma” cube is a 3x3x3 cube cut into 7 specific shaped pieces. We returned to these famous pieces (also used in the No Picnic Basket) to create a difficult packing problem. The seven Soma pieces have been perforated on all sides and the box has 7 strategically placed square pegs.
The solver must navigate these pegs; placing all 7 pieces neatly inside the box using linear moves. The result is that among 11,520 assemblies just one solution remains. Only die-hard packing fans will be able to find it!
There are no rotations in the solution and look at the included picture to ensure you don’t make an illegal move with the L and T pieces. A Square Hole Tool is provided to ensure the holes in your pieces do not stick on the pegs. All movements should slide freely.
Printing Instructions
Print all parts as oriented in the STL files.
Parts were tested with PLA, using 0.2mm layer height and 3 walls with 15% infill. No supports are required. You can add extra infill and/or walls to make the pieces more solid. If you print the Square Hole Tool, use enough perimeters/walls to make it solid.
The two sides have groves and you can only install them on the box in the proper orientation. You should glue both sides and clamp the edges together. Do not place force on the middle of the walls or they may warp inward.
The 7 Soma pieces, with the square holes on the vertical walls, require your printer to make bridges. The bridge is short and your printer should make them fine, but some may find a few bridges “droop” and the tfi on the pegs is tight. There is a square rod called “Square Hole Tool” that you can print and use to push in and out of a square hole to clean debris and enlarge it. If the rod will not enter, you may need to first clean out with sharp tweezers. If you clean many holes, you may need to make another tool as it will wear with use. The pegs could be made smaller, but the illegal moves would be easier to make (which could break a peg).
Difficulty
3.4 to 4 out of 5
The Printable Puzzle Project
The Printable Puzzle Project aims to make available high-quality open-source models of many puzzle designs. All of our models are posted with the generous permission of their designers and are licensed for non-commercial use only. Anyone may print copies for their own personal use, but selling or otherwise monetizing them is not permitted, and puzzle designers retain all rights as copyright holders of their work.
Our puzzles are modeled using the open-source puzzlecad library. The .scad file is included with this model in case you want to modify any of its design parameters; more information on how to do this can be found in the PPP Puzzle Modeling tutorial.
The "No Problem Puzzle Collection" contains many puzzles with complicated boxes that would be too hard to model using open-scad. Additionally the original design files for the boxes have been lost due to a hd-fault. That is why these puzzles only contain scad-files for the pieces.
About The Designers
From November 2020 to April 2023 Theo Geerinck and Symen Hovinga collaborated under the trading name of "No Problem Puzzles" to design and produce their puzzles. Many of their unique packing puzzles introduce fascinating features such as moving or sliding doors and elements. These features and the way they behave always add a playful new dimension to the more familiar exercise of packing shapes. Those puzzles could once be purchased through an online printing service. Alternatively, for those who owned a 3D printer the files could be obtained from Symen.
However, after the tragic loss of Symen, purchases through the ‘No Problem Shop’ was no longer possible. Therefore, Theo decided to publish the designs so that everybody can create 3d-printed copies to be enjoyed for personal use.
Modifications to the original designs for ease of printing and aesthetics provided by Dave Crabbe
Print spec
- Formats
- stlzip
- Model files
- 5
- Total size
- 1.3 MB
- Largest file
- 431.3 KB












