Vỏ hộp cho màn hình Waveshare 7.9" HDMI

Model

This is a single piece case for a Waveshare 7.9" 400x1280 display. It mounts using 4x M2.5 screws and exposes a number of different M3 and 1/4"-20 mounting holes.

Mounting holes:
3x 1/4" - 20 mounting points (one centred and two 70mm off of centre on the X axis)
4x M3 threaded inserts (4mm depth) - (mini VESA), centred and 38mm 
4x M3 threaded inserts (4mm depth) on each of the corners (Used for rear stands) 

Parts needed

4x M2.5 x 4mm - 6mm SHCS

To install legs:
4x M3 threaded inserts (4mm deep)
4x M3 x ~6mm SHCS screws

Optional:
4x M3 threaded inserts (4mm deep)
3x 3/8"-16 to 1/4"-20 thread adapter

Installation

(1) Place the single piece case over the display, install the outermost 4x M2.5 screws to affix the case to the display.

(2) If using the legs install 4x M3 x 4mm threaded inserts in the outermost holes. Use 4x M3 x ~6mm SHCS screw to affix the legs to the case. These will  at a ~20 degree 

(3) Install the optional innermost 4x M3 threaded inserts and 3x 3/8"-16 to 1/4"-20 thread adapters. These will allow you to use 1/4"-20 magic arms or mounting of your choice.