Deadpool Hueforge

I use a stronger white for this

Depend on the white you have will give different result

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 1.2mm and the Actual Thickness is 1.04mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #4 (0.4mm) swap to Red
    At layer #7 (0.64mm) swap to White for the rest.