Cthulhu Battle Top - Con quay Beyblade độc đáo

Summary:

Cthulhu is here to wreak havoc on the world.... in the form of a battle top.

Note: This particular dual silk PLA is difficult to capture in photo due to how reflective it is. I tried my best!

Features:

• Multiple versions

• 2 replaceable blade designs

• 2 top half designs

• Left hand screw to prevent separation

• Square feature to align the blade

• Stand out from the crowd 

• Uses the standard rip cord and handle provided by @stlDenise

Assembly Notes:

• Fairly standard supports were used to assist in better quality. You may be able to use less than I did but I wanted everything to look nice and did not have enough time to play around with settings.

• 2 versions of the top are supplied. One is plain so that the heads can be printed in a different color and glued on. The other is all in one and easier to print.

• If the blade is not fitting, rotate 90 degrees as they are specifically orientated

• Some small holes on the tentacles are there for clearance of the "water" splash and may need to be picked out to allow the blade to seat fully.

• The screw prints better if you lay on its side and add a flat. The 3mf provided is in this orientation.

Example Print Settings:

• Machines: CoreOne+ and MK3.5

• Material: Amolen Duel Silk PLA

• Nozzle: 0.4mm @ 230°C to 235°C

• Bed: PEI @ 60°C

• Layer Height: 0.15mm to .2mm

• Supports: Snug and tree/organic depending on the model

• Infill:10% to 20% cubic for testing. (100% for battle)

Products:

• Amolen Duel Silk PLA

• Polymaker Polydryer

• Prusa CoreOne

• PrusaCore One +

• PrusaCore One+ Ultimate

• Prusa MK4

• Prusament PLA

Disclaimer:

• Links may take you to Amazon or Prusa.com for products I endorse and use on a regular basis.

• JD3D is not responsible for any damage or harm caused by improper production, assembly and use.

• The first 2 images have enhanced backgrounds. All images depicted are real printed parts but may have enhanced lighting.